Creating An Ms-dos Boot Disk


Recommended Posts

This tutorial is designed to demonstrate how to create a MS-DOS boot disk using a floppy disk. This tutorial is based off steps used in Microsoft Windows XP. Steps may be different depending on your operating system.

1. Locate a spare floppy disk, and insert it into the floppy drive.

2. Navigate to 'My Computer.' To do that, click Start -> My Computer

3. Once in the My Computer window, locate the 3 1/2 Floppy (A:) drive, and right-click it. From the appearing dialogue, select Format...

4. A new window should have come up. In that window, check the box next to the item reading 'Create an MS-DOS startup disk'.

5. Now, click the 'Start' button.

6. A warning will come up saying 'WARNING: Formatting will erase ALL data on this disk. To format the disk, click OK. To quit, click CANCEL.' Go ahead and click OK.

7. In a few moments, you will have a bootable MS-DOS startup disk. An alert box will pop up declaring a success with the message 'Format Complete'.

Written by Matt and may not be reproduced without the authors permission.

Edited by Matt
Link to post
Share on other sites